These digital color charts are intended to be viewed on a computer monitor to show the wide range of colors available. Physical color charts and actual metal samples for color matching purposes are available on request.
Technical erection manuals for Whirlwind panel products include information on engineering specifications, preparatory requirements, erection sequence, special erection techniques and detailed design information.
These editable specifications manuals provide a standardized classification for construction information. This information can be useful to contractors, engineers, architects and other construction industry professionals.
Experience the simplicity of our new Sturdi-Space metal building kits.
Our easy-to-assemble packages contain all the high-quality steel components you need to erect your new building with ease. With an array of sizes, colors and custom configuration options to choose from, it's never been faster or easier to create the building that meets your unique needs.
Standard Sturdi-Space building sizes
20’ x 24’ x 10’ EH
20’ x 24’ x 12’ EH
20’ x 36’ x 10’ EH
20’ x 36’ x 12’ EH
24’ x 30’ x 10’ EH
24’ x 30’ x 12’ EH
24’ x 36’ x 10’ EH
24’ x 36’ x 12’ EH
30’ x 40’ x 10’ EH
30’ x 40’ x 12’ EH
Standard Sturdi-Space color options (panels & trim)
NOTE: Actual colors may vary depending on your monitor settings. Color chips available upon request.
STURDI-SPACE BUILDING CODE SPECIFICATIONS
Our Sturdi-Space buildings are manufactured to the industry’s highest standards of quality and meet the following building code specifications:
125 mph wind speed
Risk category II
Seismic zone A
20 psf reducible live load
1 psf collateral
15 psf ground snow
NOTE: Because of the standard design loads these buildings will not be available at our Minnesota facility.
STANDARD STURDI-SPACE PACKAGE
Our Sturdi-Space building kits come equipped with everything you need to quickly and easily erect the perfect facility for any use. Our standard package includes:
3:12 roof slope
26ga Galvalume Super Span X roof
26ga standard SMP Color Super Span X walls
26ga standard SMP Color trim (includes eave trim and cover trim at framed opening)
(1) 10’ wide x 8’ high framed opening located in the center of the endwall for 10’ EH buildings. Door is not included. (jambs are punched for 7’ and 8’ opening heights) DOOR NOT INCLUDED
(1) 10’ wide x 8’ framed high opening located in the center of the endwall for 12’ EH buildings. Door is not included. (jambs are punched for 7’, 8’, and 9’ opening heights) DOOR NOT INCLUDED
(1) 3070(M) white walk door with standard lockset
Red-oxide primary and secondary framing
Red-oxide base angle with 26ga standard SMP Color base trim (trim to match wall color)
Flush wall girts
By-pass purlins at interior frame
All required hardware to erect your building, including bolts, fasteners, pop rivets, tape seal, tube caulk and closures*
Detailed erection drawings for easy assembly
NOTE: Foundation design and anchor bolts are not included in the standard Sturdi-Space package.
STURDI-SPACE CUSTOMIZATION OPTIONS
Looking for ways to personalize your cold-formed metal building? Sturdi-Space structures allow for a wide array of custom modifications, making it easy to design the right building for your needs:
Add standard SMP Color painted roof panels
Add reflective insulation at roof
Add gutters and downspouts
Add (qty) 10' PreVent low profile ridge vent
Add (qty) additional 3070(M) white walk door with standard lockset
Remove 3070(M) walk door include in base package
Remove Whirlwind logo from peak box
Explore our wide array of Sturdi-Space building packages.